INSPECT INDICATOR/WARNING LIGHT
Check the following indicators and warning lights.
| Indicator/Warning Light | Switch Condition | Specified Condition |
|---|---|---|
| Master warning light | Engine switch off → on (IG) | Comes on for 3 seconds |
| Brake warning light | ||
| Slip indicator light | ||
| Tire pressure warning light*1 | ||
| Automatic high beam indicator light*2 | ||
| ABS warning light | ||
| VSC OFF indicator light | ||
| PCS warning light*3 | ||
| AFS OFF indicator light*4 | ||
| EPB*/ECB* warning light | ||
| SRS warning light | Engine switch off → on (IG) | Comes on for 6 seconds |
| MIL | Engine switch off → on (IG) |
|
| Charge warning light | ||
| EPS warning light |
EPB*: Electro-mechanical Parking Brake
ECB*: Electronically Controlled Brake System
*1: w/ Tire Pressure Warning System
*2: w/ Automatic High Beam System
*3: w/ Pre-crash Safety System
*4: w/ AFS
INSPECT SPEEDOMETER
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Data List.
| Standard Indication | Acceptable Range |
|---|---|
| 20 km/h | 21 to 25 km/h |
| 40 km/h | 41.7 to 46.2 km/h |
| 60 km/h | 62.7 to 67.2 km/h |
| 80 km/h | 83.4 to 88.4 km/h |
| 100 km/h | 104.3 to 109.3 km/h |
| 120 km/h | 125.1 to 130.6 km/h |
| 140 km/h | 145.8 to 151.8 km/h |
| 160 km/h | 166.2 to 173.2 km/h |
| 180 km/h | 186.9 to 194.5 km/h |
| 200 km/h | 207.7 to 215.7 km/h |
| 220 km/h | 228.4 to 236.8 km/h |
| 240 km/h | 249.2 to 258 km/h |
| 260 km/h | 270 to 279.2 km/h |
| Standard Indication | Acceptable Range |
|---|---|
| 20 km/h | 20.7 to 24.7 km/h |
| 40 km/h | 41.3 to 45.8 km/h |
| 60 km/h | 62 to 66.5 km/h |
| 80 km/h | 82.7 to 87.7 km/h |
| 100 km/h | 103.3 to 107.3 km/h |
| 120 km/h | 124 to 129 km/h |
| 140 km/h | 144.7 to 149.7 km/h |
| 160 km/h | 165.3 to 170.4 km/h |
| 180 km/h | 186 to 191 km/h |
| 200 km/h | 206.7 to 211.7 km/h |
| 220 km/h | 227.4 to 232.4 km/h |
| 240 km/h | 248 to 253 km/h |
| 260 km/h | 268.7 to 273.7 km/h |
| Standard Indication | Acceptable Range |
|---|---|
| 20 mph | 21 to 23.5 mph |
| 40 mph | 42 to 44.5 mph |
| 60 mph | 62.5 to 66 mph |
| 80 mph | 83.1 to 87.1 mph |
| 100 mph | 103.9 to 108.4 mph |
| 120 mph | 124.7 to 129.6 mph |
| 140 mph | 145.4 to 150.7 mph |
| 160 mph | 166.2 to 171.9 mph |
| 180 mph | 187 to 193 mph |
If the result is not as specified, the speedometer may have a malfunction.
Note
Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.
Check the deflection width of the speedometer indicator.
INSPECT TACHOMETER
Connect a tune-up tachometer and start the engine.
Compare the test results with the tachometer indicator.
DC 13.5 V at 25°C (77°F)
| Standard Indication | Acceptable Range Data in ( ) is for Reference |
|---|---|
| 700 rpm | 630 to 770 rpm |
| 1000 rpm | (900 to 1100) rpm |
| 2000 rpm | (1850 to 2150) rpm |
| 3000 rpm | 2800 to 3200 rpm |
| 4000 rpm | (3800 to 4200) rpm |
| 5000 rpm | 4800 to 5200 rpm |
| 6000 rpm | (5750 to 6250) rpm |
| 7000 rpm | 6700 to 7300 rpm |
| 8000 rpm | (7700 to 8300) rpm |
If the result is not as specified, the tachometer may have a malfunction.
INSPECT METER/GAUGE
Connect the GTS to the DLC3.
Perform the Active Test Click here.
INSPECT WARNING/INDICATOR LIGHT
Connect the GTS to the DLC3.
Perform the Active Test Click here.
INSPECT MULTI-INFORMATION DISPLAY
Connect the GTS to the DLC3.
Perform the Active Test Click here.
INSPECT HEADUP DISPLAY (w/ Headup Display)
Test mode
| *a | DTCs are displayed |
| *b | DTCs are not displayed |
Diagnostic trouble code
Operate the headup display switch assembly to display the DTCs for the headup display.
Tech Tips
If any DTCs are displayed, this indicates that there is a communication malfunction with the combination meter assembly or the AVC-LAN.
| DTC | Malfunction Status |
|---|---|
| 01 | There is a loss of communication with the combination meter assembly (current malfunction). |
| 02 | There is a loss of communication with the combination meter assembly (past malfunction). |
| 03 | There is a loss of communication with the AVC-LAN (current malfunction). |
| 04 | There is a loss of communication with the AVC-LAN (past malfunction). |
Customize
Operate the headup display switch assembly to set the display function to ON or OFF.