INSIDE HANDLE LIGHT (for Rear Door) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. A01FDCZ

      Detach the 2 clips and 5 claws.

    2. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.

  2. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH


    1. A01FG1B

      Detach the 3 claws and remove the rear door inside handle bezel plug.

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A01FF4Y

      Remove the 3 screws.

    2. Detach the 8 clips.

    3. A01FH55E01

      Detach the reference boss in the direction indicated by the arrow in the illustration.

    4. Using a screwdriver, detach the 3 claws and remove the rear door trim board.

      Tech Tips

      Tape the screwdriver tip before use.

      Text in Illustration
      *1 Reference Boss
      *2 Protective Tape

    5. Disconnect each connector.

    6. A01FFSV

      Disconnect the rear door lock remote control cable and rear door inside locking cable.

  4. REMOVE REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH


    1. A01FI2X

      Detach the claw and remove the rear door inside handle illumination light assembly LH.

    2. Disconnect the connector.

  5. REMOVE REAR DOOR INSIDE HANDLE SUB-ASSEMBLY LH


    1. A01FH6F

      Remove the 14 screws and rear door inside handle together with the rear door trim ornament and No. 1 interior illumination light.

    2. A01FG6U

      Remove the screw.

    3. Detach the claw and remove the rear door inside handle.

  6. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. A01FGRA

      Detach the 3 claws and remove the No. 1 interior illumination light assembly LH from the rear door trim ornament sub-assembly LH.