DOOR COURTESY LIGHT (for Rear Door) INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL NO. 2 COURTESY LIGHT BULB


    1. Install the No. 2 courtesy light bulb to the No. 2 courtesy light assembly.

    2. Attach the 2 claws to install the cover.

  2. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. Attach the claw to install the No. 2 courtesy light assembly.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. Connect the rear door lock remote control cable and rear door inside locking cable.

    2. Connect each connector.

    3. A01FGYPE01
      Text in Illustration
      *1 Reference Boss

      Attach the 3 claws to install the rear door trim board to the rear door inner glass weatherstrip.

    4. Attach the reference boss in the direction indicated by the arrow in the illustration.

    5. Attach the 8 clips to install the rear door trim board.

    6. Install the 3 screws.

  4. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH


    1. Attach the 3 claws to install the rear door inside handle bezel plug.

  5. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. Attach the 2 clips and 5 claws to install the rear power window regulator switch assembly with rear door armrest base panel.

  6. CHECK POWER WINDOW

    Click here

  7. CHECK POWER DOOR LOCK CONTROL SYSTEM

    Click here