LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (INT)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / (desired system).

      5. Select the setting by referring to the table below.

        Illuminated Entry
        Display Default Content Setting Relevant ECU
        Lighting Time 15 s Changes the lighting time after closing all of the doors [It will fade out immediately when turning the engine switch from off to on (ACC) or on (IG)]. 7.5 s, 15 s or 30 s Main body ECU (Multiplex network body ECU)
        I/L when ACC OFF ON A function that turns on the interior lights when the engine switch is turned from on (IG) or on (ACC) to off (the interior lights turn on when the map light switch is set to DOOR). ON or OFF
        I/L ON W/Door Key Unlock ON A function that turns on the interior lights when the door is unlocked (the interior lights turn on when the map light switch is set to DOOR). ON or OFF
        Room Light when Aprchd ON A function that turns on the room lights when the key is brought within the vehicle exterior detection area (the room lights turns on when the map light switch is set to DOOR). ON or OFF
        Inside Foot Light ON Changes the interior foot lights control. ON or OFF
        Mirr-Foot-Lgt Approached ON Lights up the door mirror foot lights when the key is brought within the vehicle exterior detection area. ON or OFF
        Mirr-Foot-Lgt Unlocked ON Lights up the door mirror foot lights when the doors are unlocked using a mechanical key or door control transmitter. ON or OFF
        Mirror Foot Light Time 15 s Changes the lighting time of the door mirror foot lights. 7.5 s, 15 s or 30 s
        Light Control ON This function controls the interior foot lights, inside handle illumination and door ambient light. ON or OFF
        Interior Light Control ON This function controls the interior lights. ON or OFF
        Exterior Light Control ON This function controls the door mirror foot lights. ON or OFF
        Light Control
        Display Default Content Setting Relevant ECU
        Light up Clearance Lights at Door Unlock Function ON A function that turns on the clearance lights, taillights and license plate lights for 15 seconds when the doors are unlocked by an entry unlock operation or wireless unlock operation. ON or OFF Main body ECU (Multiplex network body ECU)

    2. Customizing with Multi-display.


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Light Settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Interior Lights Off Time 15 s This function controls the interior lights. OFF, 7.5 s, 15 s or 30 s Main body ECU (Multiplex network body ECU)
        Exterior Lights Off Time 15 s This function controls the door mirror foot lights. OFF, 7.5 s, 15 s or 30 s