SECURITY HORN ASSEMBLY (for Luggage Compartment) INSTALLATION


  1. INSTALL THEFT WARNING SIREN ASSEMBLY


    1. Install the theft warning siren assembly with the 2 nuts.

    2. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER RH


    1. Install the luggage compartment trim inner cover with the 3 clips.

  3. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. Install the luggage compartment trim cover with the 3 clips and 2 nuts.

  4. INSTALL ROPE HOOK

    Tech Tips

    Use the same procedure for both rope hooks.


    1. Rotate the rope hook to install the rope hook.

  5. INSTALL REAR FLOOR FINISH PLATE


    1. Attach the 6 clips to install the rear floor finish plate.

    2. Install the 3 clips.

  6. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET LH


    1. Attach the claw to install the rear luggage compartment tray bracket.

    2. Install the clip.

  8. INSTALL ROPE HOOK ASSEMBLY

    Tech Tips

    Use the same procedure for all rope hooks.


    1. Install the rope hook with the bolt.

    2. Attach the 2 claws to close the cover.

  9. INSTALL SPARE WHEEL COVER TRAY


    1. w/o Spare Tire:


      1. Install the spare wheel cover tray.

    2. w/ Spare Tire, for Type B:


      1. Install the spare wheel cover tray.

  10. INSTALL LUGGAGE COMPARTMENT TRIM BOX (w/o Spare Tire)


    1. Install the luggage compartment trim box.

  11. INSTALL LUGGAGE COMPARTMENT SIDE TRAY (w/ Spare Tire)


    1. Install the luggage compartment side tray.

  12. INSTALL SIDE TRIM BOX


    1. Install the side trim box.

  13. INSTALL SIDE TRIM BOX LH


    1. Install the side trim box.

  14. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH


    1. Install the luggage compartment trim cover.

  15. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH


    1. Install the luggage compartment trim cover.

  16. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.

  17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.