ELECTRICAL KEY OSCILLATOR (for Rear Floor) INSTALLATION


  1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Attach the 4 claws to install the No. 2 indoor electrical key antenna assembly.

    2. Connect the connector.

    3. Attach the claw to close the lid.

    4. Return the floor carpet to its original position and attach the 2 clips.

  2. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY


    1. Place the bench type rear seat cushion assembly in the cabin.

    2. w/ Seat Heater System:

      Connect the 2 rear seat cushion heater connectors.

    3. Attach the 2 rear hooks of the bench type rear seat cushion assembly to the beach type rear seatback assembly.

    4. Attach the 2 front hooks to install the bench type rear seat cushion assembly.

      Note

      When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. CHECK SEAT HEATER OPERATION (w/ Seat Heater System)

    Click here