WIRELESS DOOR LOCK CONTROL SYSTEM SYSTEM DESCRIPTION


  1. WIRELESS DOOR LOCK CONTROL SYSTEM

    The wireless door lock control system can be used to lock and unlock all doors from a distance. The system is controlled by an electrical key transmitter sub-assembly which sends radio waves to the door control receiver. The certification ECU (smart key ECU assembly) performs an ID code identification process and engages the door lock control.

  2. MULTI CHANNEL FUNCTION

    The wireless door lock control system has a multi-channel function. Each time the switch on the electrical key transmitter sub-assembly is pressed, the channel is switched alternately between 2 different frequencies and the signal is sent to the door control receiver.

  3. FUNCTION OF MAIN COMPONENTS

    Component Function
    Electrical key transmitter sub-assembly

    • Has lock, unlock, luggage open and panic*1 switches.

    • Transmits weak radio waves (recognition codes and function codes) to the door control receiver.

    • Illuminates the indicator light (LED) during transmission.
    Door control receiver Receives weak radio waves from the electrical key transmitter sub-assembly and sends them to the certification ECU (smart key ECU assembly).

    • Front door courtesy light switch assembly LH/RH

    • Rear door courtesy light switch assembly LH/RH

    • Luggage door courtesy switch*2

    • Turns on when a door is opened and turns off when it is closed.

    • Outputs door status signals (open or closed) to the main body ECU (multiplex network body ECU).

    Front door lock assembly LH*3

    Front door lock assembly RH*4

    • Built-in motor locks or unlocks door.

    • Transmits the door lock position of each door to the main body ECU (multiplex network body ECU).

    • Front door lock assembly RH*3/LH*4

    • Rear door lock with motor assembly LH/RH

    		 Built-in door lock position switch detects the door status (locked or unlocked) and outputs a signal to the main body ECU (multiplex network body ECU). This switch turns off when the door is locked and turns on when the door is unlocked.
    Certification ECU (Smart key ECU assembly) Matches the code data with the registered code and outputs the code data to the main body ECU (multiplex network body ECU).

    • *1: w/ Panic Switch

    • *2: w/o Power Trunk Lid System

    • *3: for LHD

    • *4: for RHD

  4. SYSTEM FUNCTION

    The electrical key transmitter sub-assembly has the lock, unlock, luggage open and panic switches (w/ Panic Switch). Operating these switches activate each function.

    The wireless door lock control system has the following functions:

    Tech Tips

    The default settings of the following functions are on. Part of these functions can be customized Click here.

    Function Operation
    All door lock Pressing the lock switch locks all doors.

    All door unlock

    (Unlock 2 operation)*1

    		 Pressing the unlock switch twice within 5 seconds unlocks all doors after the driver door is unlocked.
    Luggage compartment door open Pressing the luggage door open switch of the electrical key transmitter sub-assembly for longer than about 0.8 seconds opens the luggage compartment door.
    Automatic lock If none of the doors is opened within 30 seconds after they are unlocked by the wireless door lock control, all doors will lock again automatically.
    Answer back (Hazard warning light)

    • When the doors are locked by wireless operation, the hazard warning lights flash once.

    • When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
    Answer back (Wireless door lock buzzer)*2

    • When the doors are locked by wireless operation, the wireless door lock buzzer sounds once.

    • When the doors are unlocked by wireless operation, the wireless door lock buzzer sounds twice.

    • When the luggage compartment door is opened by wireless operation, the wireless door lock buzzer sounds.
    Panic alarm*3

    Pressing the panic switch of the electrical key transmitter sub-assembly for longer than about 1.5 seconds causes the following alarms to activate:


    • Sound the vehicle horns.

    • Blinks the headlights, hazard warning lights and taillights.

    • Illuminates the interior lights.

    While the panic alarm is operating, pressing any switch of the electrical key transmitter sub-assembly cancels the alarm operation.
    Door ajar warning*4 The buzzer sounds when the lock switch is pressed when any of the doors are ajar, and it sounds for 5 seconds continuously. The buzzer stops when all doors are closed or the unlock switch is pressed.
    Illuminated entry When all doors are locked, pressing the unlock switch causes the interior lights to come on simultaneously with the unlock operation.
    Self-diagnostic mode

    The following are conditions to enter self-diagnostic mode:


    • If the door control receiver receives normal radio waves from the electrical key transmitter sub-assembly when the system is in diagnostic mode, it sounds the wireless door lock buzzer in a normal pattern that corresponds to the function of each switch.
    Memory call This function operates the memory system in accordance with the key ID.

    • *1: The default setting except G.C.C. countries, Korea, Australia and New Zealand is off.

    • *2: w/ Buzzer Answer-back

    • *3: w/ Panic Switch

    • *4: w/ Door Ajar Warning