LUGGAGE COMPARTMENT DOOR LOCK INSPECTION


  1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    1. Check operation of the door lock motor.


      1. A01FDMGE01
        Text in Illustration
        *a Close (Lock)
        *b Open (Unlock)
        *c

        Component without harness connected

        (Luggage Compartment Door Lock Assembly)

        Move the door lock to the close (lock) position.

      2. Apply battery voltage to the door lock motor and check operation of the door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (B)

        Battery negative (-) → 2 (E)

        		 Luggage compartment door lock motor open (unlock) operation

        If the result is not as specified, replace the luggage compartment door lock assembly.

    2. Check operation of the door courtesy switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance
        Measurement Condition Door Lock Condition Specified Condition
        2 (E) - 3 (D+) Close (Lock) 10 kΩ or higher
        2 (E) - 3 (D+) Open (Unlock) Below 1 Ω

        If the result is not as specified, replace the luggage compartment door lock assembly.