SLIDING ROOF SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE SLIDING ROOF SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Power Window.

      5. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Door Key P/W Up OFF This function is used to close the driver door window and sliding roof by operating the mechanical key. OFF/ON Main body ECU (Multiplex network body ECU)
        Door Key P/W Down OFF This function is used to open the driver door window and sliding roof by operating the mechanical key. OFF/ON Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit OFF This function is used to open the driver door window and sliding roof using the wireless key transmitter. OFF/ON Main body ECU (Multiplex network body ECU)

      6. Enter the following menus: Customize Setting / Slide Roof.

      7. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Door Key Related Operation*1 Slide Function to select tilt up or slide open of sliding roof key-linked function. Slide/Tilt Sliding roof drive gear sub-assembly (Sliding roof ECU)
        Wireless Key Related Operation*2 Slide Function to select tilt up or slide open of sliding roof wireless transmitter-linked function. Slide/Tilt Sliding roof drive gear sub-assembly (Sliding roof ECU)
        Front SW Auto Operation ON This function is used to enable or disable the auto operation. OFF/ON Sliding roof drive gear sub-assembly (Sliding roof ECU)

        • *1: This function is linked with the power window key-linked function. If the power window key-linked function is set to OFF, the sliding roof key-linked function will not operate even when it is set to ON.

        • *2: This function is linked with the power window wireless transmitter-linked function. If the power window wireless transmitter-linked function is set to OFF, the sliding roof wireless transmitter-linked function will not operate even when it is set to ON.

      8. Enter the following menus: Customize Setting / Security.

      9. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Slide Roof Open Warning ON This function is used to enable or disable the sliding roof open warning. OFF/ON Main body ECU (Multiplex network body ECU)