INTEGRATION RELAY INSTALLATION


  1. INSTALL NO. 2 INTEGRATION RELAY


    1. Connect the 3 connectors.

    2. Attach the 2 claws to install the No. 2 integration relay.

  2. INSTALL NO. 2 RELAY BLOCK COVER


    1. A01FFZF

      Attach the 2 claws closer to the rear of the vehicle.

    2. Lower the No. 2 relay block cover in the direction shown by the arrow in the illustration and attach the front claw to install it.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.