GENERATOR INSTALLATION


  1. INSTALL GENERATOR ASSEMBLY


    1. A01FG6ME02

      Install the 2 brackets with the 2 bolts.

      Torque:
      for bolt A
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }
      for bolt B
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }
      Text in Illustration
      A01FGIV Bolt A
      A01FJ4N Bolt B

    2. Install the generator with the 2 bolts.

      Torque:
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

    3. Install the bracket with the nut.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    4. Connect the generator wire to terminal B with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    5. Install the terminal cap.

    6. Attach the 2 clamps, and connect the generator connector to the generator.

    7. Connect the connector to the cooling fan ECU.

  2. CONNECT WIRE HARNESS


    1. A01FIK8E01

      Connect the wire harness with the 3 nuts (A).

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Connect the 2 connectors (B).

  3. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY


    1. Install the pulley and cover plate with the bolt.

      Torque:
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

  4. INSTALL NO. 2 ENGINE COVER


    1. Install the No. 2 engine cover with the 3 clips.

    2. Connect the clamp.

  5. INSTALL FAN AND GENERATOR V BELT

    Click here

  6. INSTALL ENGINE UNDER COVER


    1. for 2WD:


      1. Install the engine under cover with the 13 screws and 3 clips.

    2. for AWD:


      1. Install the engine under cover with the 10 screws and 3 clips.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.