BLIND SPOT MONITOR MAIN SWITCH INSTALLATION


  1. INSTALL BLIND SPOT MONITOR MAIN SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY)


    1. Attach the 2 claws to install the blind spot monitor switch (integration control and panel assembly).

  2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Connect the connectors.

    2. Attach the 9 clips and guide to install the No. 1 instrument panel safety pad sub-assembly.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect the connectors and attach the clamp.

    2. Attach the 2 claws to install the No. 1 instrument panel under cover sub-assembly.

    3. Install the 3 screws <A>.

  4. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY


    1. Attach the 4 clips to install the No. 1 instrument panel garnish sub-assembly.

  5. INSTALL INSTRUMENT SIDE PANEL LH


    1. Attach the 7 clips to install the instrument side panel LH.

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 5 clips and 2 guides to install the instrument panel finish panel end LH.

  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL


    1. Connect the connector.

    2. Attach the 9 clips and guide to install the center instrument cluster finish panel.

  8. INSTALL FRONT DOOR OPENING TRIM COVER LH


    1. Attach the 5 claws to install the front door opening trim cover LH.

      Note

      After installing the front door opening trim cover LH, make sure that the lip of the front door opening trim weatherstrip LH is not pinched.

  9. INSTALL FRONT DOOR SCUFF PLATE LH


    1. Attach the 10 claws and 4 clips to install the front door scuff plate LH.