BLIND SPOT MONITOR SENSOR INSTALLATION


  1. INSTALL BLIND SPOT MONITOR SENSOR LH

    Note


    • Avoid any impact to the blind spot monitor sensor LH.

    • Do not drop the blind spot monitor sensor LH. If it is dropped, replace it with a new one.


    1. Connect the connector.

    2. Install the blind spot monitor sensor LH with the 3 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Attach the 3 clamps.

  2. INSTALL BLIND SPOT MONITOR SENSOR RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR BUMPER COVER

    Click here