ULTRASONIC SENSOR (for Front Side) INSTALLATION


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    1. A01FF62E01
      Text in Illustration
      *a Keyhole
      *b Slit

      for RH Corner Sensor, Front LH Sensor:

      Attach the 4 claws and install the No. 1 ultrasonic sensor retainer to the front bumper cover.

      Tech Tips

      When installing the retainer, align the keyhole and slit as shown in the illustration.

    2. A01FH23E01
      Text in Illustration
      *a Keyhole
      *b Slit

      for LH Corner Sensor, Front RH Sensor:

      Attach the 4 claws and install the No. 1 ultrasonic sensor retainer to the front bumper cover.

      Tech Tips

      When installing the retainer, align the keyhole and slit as shown in the illustration.

  2. INSTALL ULTRASONIC SENSOR CLIP (for Corner Sensor)


    1. A01FDLT

      for LH Side:

      Attach the claw to install the ultrasonic sensor clip to the No. 1 ultrasonic sensor assembly.

  3. INSTALL NO. 4 ENGINE ROOM WIRE


    1. for Sport Package:

      Attach the 9 clamps to install the No. 4 engine room wire.

    2. except Sport Package:

      Attach the 10 clamps to install the No. 4 engine room wire.

  4. INSTALL NO. 1 ULTRASONIC SENSOR


    1. Attach the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Tech Tips

      Use the same procedure for all No. 1 ultrasonic sensors.

    2. for Corner Sensor, LH Side:

      Attach the claw to install the No. 1 ultrasonic sensor clip to the No. 4 engine room wire.

    3. Connect the connector.

      Tech Tips

      Use the same procedure for all No. 1 ultrasonic sensors.

  5. INSTALL FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here