DATA LIST
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List (w/o Power Trunk Lid System).
Enter the following menus: Body Electrical / Back Door / Data List (w/ Power Trunk Lid System).
According to the display on the tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Back Door Courtesy SW | Back door courtesy switch signal/ ON or OFF | ON: Back door open OFF: Back door closed |
This item is not related luggage compartment door condition (w/ Power Trunk Lid System). |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Half Latch SW | Luggage door closer assembly half-latch switch signal / ON or OFF | ON: Half-latch switch of luggage door closer assembly ON (Luggage compartment door open) OFF: Half-latch switch of luggage door closer assembly OFF (Luggage compartment door closed) |
|
| Pawl Position Switch | Luggage door closer assembly pawl position switch signal / ON or OFF | ON: Pawl position switch of luggage door closer assembly ON (Luggage compartment door open) OFF: Pawl position switch of luggage door closer assembly OFF (Luggage compartment door closed) |
|