MAYDAY SWITCH INSTALLATION


  1. INSTALL MAP LIGHT ASSEMBLY


    1. Connect the 2 connectors.

    2. Attach the 4 clips and 2 guides to install the map light assembly.

  2. INSTALL FRONT ROOF TOP GARNISH

    A01FESQE01
    Text in Illustration
    *1 Guide
    *2 Fastener

    1. w/ Night View System:


      1. While being careful not to apply force to the camera, attach the 6 claws, guide and fastener to install the front roof top garnish.

        Note

        When removing and installing the front roof top garnish, do not apply force to the camera sensor located at (x).

    2. w/o Night View System:


      1. While being careful not to apply force to the camera (for vehicles with the lane keeping assist system), attach the 6 claws and guide to install the front roof top garnish.

        Note

        w/ Lane Keeping Assist System:

        When removing and installing the front roof top garnish, do not apply force to the camera sensor located at (x).

        A01FHZ6E01
        Text in Illustration
        *A for Standard *B w/ Rain Sensor
        *C w/ Lane Keeping Assist System - -

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.