NAVIGATION ANTENNA INSTALLATION


  1. INSTALL NAVIGATION ANTENNA ASSEMBLY (for RHD)


    1. Install the navigation antenna with the 2 screws.

    2. Attach the 5 clamps.

  2. INSTALL DEFROSTER NOZZLE ASSEMBLY (for RHD)


    1. Install the defroster nozzle assembly with the 3 screws <F>.

    2. Attach the clamps.

  3. INSTALL NO. 1 HEATER TO REGISTER DUCT (for RHD)


    1. Install the No. 1 heater to register duct with the 3 screws <F>.

  4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT (for RHD)


    1. Attach the claw and 2 guides to install the No. 1 side defroster nozzle duct.

    2. Install the screw <F>.

  5. INSTALL NAVIGATION ANTENNA ASSEMBLY (for LHD)


    1. Install the navigation antenna with the 2 screws.

    2. Attach the 4 clamps.

  6. INSTALL NO. 3 HEATER TO REGISTER DUCT


    1. Install the No. 3 heater to register duct with the 3 screws <F>.

  7. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT


    1. Attach the claw and 2 guides to install the No. 2 side defroster nozzle duct.

    2. Install the screw <F>.

  8. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. CHECK SRS WARNING LIGHT

    Click here