NAVIGATION SYSTEM, Diagnostic DTC:B1575

DTC Code DTC Name
B1575 GVIF Disconnected (from EMV/MM Integrated Device to Multi Display)

DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
B1575 GVIF disconnected (from Multi-media module receiver assembly to Accessory meter assembly [for 12.3 Inch] or Multi-display [for 8 Inch])

  • Harness or connector (GVIF cable)

  • Multi-media module receiver assembly

INSPECTION PROCEDURE

PROCEDURE


  1. CLEAR DTC


    1. Clear the DTCs Click here.


    NEXT

  2. CHECK DTC


    1. Recheck for DTCs and check if the same DTC is output again Click here.

      OK
      No DTCs are output.

    NG

    REPLACE WIRE HARNESS (GVIF CABLE) Click here

    OK

    USE SIMULATION METHOD TO CHECK Click here

  3. REPLACE WIRE HARNESS (GVIF CABLE)


    1. Replace the wire harness (GVIF cable) with a new or normally functioning one.


    NEXT

  4. CLEAR DTC


    1. Clear the DTCs Click here.


    NEXT

  5. CHECK DTC


    1. Recheck for DTCs and check if the same DTC is output again Click here.

      OK
      No DTCs are output.

    NG

    REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here

    OK

    END (GVIF CABLE IS DEFECTIVE)