STEREO JACK ADAPTER ASSEMBLY REMOVAL


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    A01FD7VE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the center instrument cluster finish panel.

    2. Detach the 9 clips and guide.

    3. Disconnect the connector and remove the center instrument cluster finish panel.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A01FFCIE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel finish panel end RH.

    2. Detach the 5 clips and 2 guides and remove the instrument panel finish panel end RH.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A01FFFLE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel finish panel end LH.

    2. Detach the 5 clips and 2 guides and remove the instrument panel finish panel end LH.

  4. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY

    A01FFDF

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the instrument panel cup holder assembly.

  5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Detach the claw and slide the shifting hole cover downwards.

    2. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.

      A01FEMDE01
      Text in Illustration
      *1 Shifting Hole Cover - -

  6. REMOVE UPPER CONSOLE PANEL

    A01FDELE01
    Text in Illustration
    *1 Upper Console Panel
    *2 Upper Rear Console Panel Sub-assembly
    *3 Remote Touch Assembly

    1. Remove the 2 screws.

    2. Detach the 9 clips.

    3. Disconnect the connectors, detach the clamps, and remove the upper console panel together with the upper rear console panel sub-assembly and remote touch assembly.

  7. REMOVE LOWER CONSOLE BOX POCKET

    A01FH3B

    1. Detach the 8 claws and remove the lower console box pocket.

  8. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. A01FDSD

      Detach the 2 claws and remove the No. 1 stereo jack adapter assembly.