NAVIGATION SYSTEM TERMINALS OF ECU


  1. MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    A01FHFEE03
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    N66-7 (GND2) - N162-12 (GND1) W-B - W-B Ground Always Below 1 V
    N66-12 (+B) - N162-12 (GND1) L - W-B Power source Always 11 to 14 V
    N162-1 (CANH) B CAN communication signal - -
    N162-2 (CANL) W CAN communication signal - -
    N162-3 (CNH1) L Local bus communication signal - -
    N162-4 (CNL1) LG Local bus communication signal - -
    N162-7 (TX1+) P AVC-LAN communication signal - -
    N162-8 (TX1-) R AVC-LAN communication signal - -
    N162-10 (VMTF) - N162-12 (GND1) Y - W-B Visual mute signal When image on display switches 3.5 V or higher → Below 1 V → 3.5 V or higher
    N162-12 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
    N162-13 (ILL-) - N162-12 (GND1) W - W-B Illumination signal Engine switch on (IG), light control switch off → tail or head (Light intensity is not max. or min.) Below 1 V → Pulse generation
    N162-14 (ILL+) - N162-12 (GND1) G - W-B Illumination signal Engine switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
    N162-15 (IG) - N162-12 (GND1) L - W-B Power source (IG) Engine switch on (IG) 11 to 14 V
    Engine switch off Below 1 V
    N162-16 (ACC1) - N162-12 (GND1) GR - W-B Power source (ACC) Engine switch on (ACC) 11 to 14 V
    Engine switch off Below 1 V
    N162-17 (+B1) - N162-12 (GND1) L - W-B Power source Always 11 to 14 V
    N162-27 (MIN+) - N162-12 (GND1)

    W - W-B*1

    Y - W-B*2

    		 Microphone voice signal

    See "MICROPHONE" in Operation Check Click here

    		-
    N162-28 (SGND) - N162-12 (GND1) Shielded - W-B Shield ground Always Below 1 V
    N162-29 (MACC) - N162-12 (GND1)*1 B - W-B Telephone microphone assembly power supply Engine switch off Below 1 V
    Engine switch on (ACC) 4 to 6 V
    N162-30 (SW1) - N162-32 (SWG) Y - LG Steering pad switch signal Steering pad switch not operated 4.44 to 5.43 V
    Seek+ switch pushed 0.45 to 0.65 V
    Seek- switch pushed 1.19 to 1.49 V
    Vol+ switch pushed 2.09 to 2.54 V
    Vol- switch pushed 3.2 to 3.88 V
    N162-31 (SW2) - N162-32 (SWG) R - LG Steering pad switch signal Steering pad switch not operated 4.44 to 5.43 V
    MODE switch pushed 0.45 to 0.65 V
    On hook switch pushed 1.19 to 1.49 V
    Off hook switch pushed 2.09 to 2.54 V
    Voice switch pushed 3.2 to 3.88 V
    N162-32 (SWG) - Body ground LG - Body ground Steering pad switch signal Always Below 1 V
    N162-45 (TX3+) L AVC-LAN communication signal - -
    N162-46 (TX3-) LG AVC-LAN communication signal - -
    N162-48 (MIN-) - Body ground

    R - Body ground*1

    BR - Body ground*2

    		 Microphone voice signal

    See "MICROPHONE" in Operation Check Click here

    		-
    N162-49 (SNS2) - N162-12 (GND1) B - W-B Microphone connection detection signal Always Below 1 V
    N162-56 (SPD) - N162-12 (GND1) SB - W-B Speed signal from combination meter assembly

    See "Vehicle Signal Check Mode" in Operation Check Click here

    		-
    N69-5 (AGND) - Body ground Shielded - Body ground Shield ground Always Below 1 V
    N69-7 (VAR+) - N69-15 (VA-) W - R Sound signal (Right) AUX audio device playing (When stereo jack adapter used) A waveform synchronized with sound is output.
    N69-8 (VAL+) - N69-15 (VA-) B - R Sound signal (Left) AUX audio device playing (When stereo jack adapter used) A waveform synchronized with sound is output.
    N69-13 (SG) - N162-12 (GND1) Shield - W-B Shield ground Always Below 1 V
    N69-6 (VV+) - N162-12 (GND1) Y - W-B Video signal External device playing (When stereo jack used) A waveform synchronized with sound is output
    N69-14 (VV-) - N162-12 (GND1) BR - W-B Video signal External device playing (When stereo jack used) A waveform synchronized with sound is output
    N69-15 (VA-) - N162-12 (GND1) R - W-B Sound signal ground Always Below 1 V
    N69-16 (ADPG) - N162-12 (GND1) G - W-B External device connector detection signal External device connected Below 1 V
    External device not connected 2.1 to 3 V
    N145-1-1 (USB-)*2 B USB communication line - -
    N145-1-2 (USB+)*2 B USB communication line - -
    N145-1-3 (USBS) - Body ground*2 B - Body ground Shield ground Always Below 1 V
    N145-2 (USBG) - Body ground*2 W - Body ground Shield ground Always Below 1 V
    N145-3 (VOT+) - N162-12 (GND1)*2 W - W-B Sent voice signal Destination assist service in use and vehicle occupant speaking to operator A waveform synchronized with the sent voice is output.
    N145-4 (USBV) - N162-12 (GND1)*2 W - W-B Telematics transceiver power supply Engine switch on (ACC) 4.75 to 5.25 V
    Engine switch off Below 1 V
    N145-5 (VOT-) - N162-12 (GND1)*2 R - W-B Sent voice signal Destination assist service in use and vehicle occupant speaking to operator A waveform synchronized with the sent voice is output.
    N145-6 (VOR-) - N162-12 (GND1)*2 B - W-B Receive voice signal Destination assist service in use and operator speaking to vehicle occupant A waveform synchronized with the received voice is output.
    N145-7 (VOR+) - N162-12 (GND1)*2 G - W-B Receive voice signal Destination assist service in use and operator speaking to vehicle occupant A waveform synchronized with the received voice is output.
    N164-1 (USV1) # Power source - -
    N164-2 (US1-) # Data signal - -
    N164-3 (US1+) # Data signal - -
    N164-4 (UGD1) # Ground - -
    N164-5 (USG1) Shielded Shield ground - -
    N138-1 - N162-12 (GND1) W - W-B MOST communication signal Engine switch on (ACC) 4.5 V or higher
    Engine switch off Below 1 V
    N138-2 B MOST communication signal - -
    N138-3 B MOST communication signal - -
    N138-4 - N162-12 (GND1) Shielded - W-B Shield ground Always Below 1 V
    N138-5 B MOST communication signal - -
    N138-6 B MOST communication signal - -
    N138-7 - N162-12 (GND1) Shielded - W-B Shield ground Always Below 1 V
    N169-1 (GVIF) B Video signal (Digital) - -

    • *1: w/o Telematics Transceiver

    • *2: w/ Telematics Transceiver

    • #: There is no wire color information

  2. ACCESSORY METER ASSEMBLY (for 12.3 Inch)

    A01FGL6E02
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    N62-2 (ILL) - N62-13 (GND1) G - W-B Illumination signal Engine switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
    N62-6 (TX1+) B AVC-LAN communication signal - -
    N62-7 (TX+) L AVC-LAN communication signal - -
    N62-11 (VMTI) - N62-13 (GND1) Y - W-B Visual mute signal When image on display switches 3.5 V or higher → Below 1 V → 3.5 V or higher
    N62-12 (+B2) - N62-13 (GND1) SB - W-B Power source Always 11 to 14 V
    N62-13 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
    N62-15 (WUI) Y Local bus communication signal - -
    N62-16 (WUO) B Local bus communication signal - -
    N62-18 (TX1-) W AVC-LAN communication signal - -
    N62-19 (TX-) LG AVC-LAN communication signal - -
    N62-23 (IG) - N62-13 (GND1) LG - W-B Power source (IG) Engine switch on (IG) 11 to 14 V
    Engine switch off Below 1 V
    N62-24 (ACC) - N62-13 (GND1) GR - W-B Power source (ACC) Engine switch on (ACC) 11 to 14 V
    Engine switch off Below 1 V
    N165-1 (GVIF)* B Video signal (Digital) - -
    N150-1 (GVIF) B Video signal (Digital) - -

    • *: w/ Night View System

    • #: There is no wire color information

  3. MULTI-DISPLAY (for 8 Inch)

    A01FGPNE01
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    N155-2 (ILL) - N155-13 (GND1) G - W-B Illumination signal Engine switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
    N155-6 (TX1+) B AVC-LAN communication signal - -
    N155-7 (TX+) L AVC-LAN communication signal - -
    N155-11 (VMTI) - N155-13 (GND1) Y - W-B Visual mute signal When image on display switches 3.5 V or higher → Below 1 V → 3.5 V or higher
    N155-12 (+B2) - N155-13 (GND1) SB - W-B Power source Always 11 to 14 V
    N155-13 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
    N155-18 (TX1-) W AVC-LAN communication signal - -
    N155-19 (TX-) LG AVC-LAN communication signal - -
    N155-24 (ACC) - N155-13 (GND1) GR - W-B Power source (ACC) Engine switch on (ACC) 11 to 14 V
    Engine switch off Below 1 V
    N156-1 (GVIF) B Video signal (Digital) - -

    • #: There is no wire color information

  4. REMOTE TOUCH

    A01FH9SE14
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    N60-1 (+B) - N60-15 (GND) P - W-B Power source Always 11 to 14 V
    N60-2 (ACC) - N60-15 (GND) GR - W-B Power source (ACC) Engine switch on (ACC) 11 to 14 V
    Engine switch off Below 1 V
    N60-4 (MO-) LG Local Bus communication signal - -
    N60-5 (MO+) L Local Bus communication signal - -
    N60-9 (ILL+) - N60-15 (GND) G - W-B Illumination signal Engine switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
    N60-12 (MI-) Y Local Bus communication signal - -
    N60-13 (MI+) B Local Bus communication signal - -
    N60-15 (GND) - Body ground W-B - Body ground Ground Always Below 1 V
    N60-16 (ILL-) - N60-15 (GND) W - W-B Illumination signal Engine switch on (IG), light control switch off → tail or head position (Light intensity is not max. or min.) Below 1 V → Pulse generation

  5. STEREO COMPONENT AMPLIFIER ASSEMBLY Click here

  6. TELEMATICS TRANSCEIVER (w/ Telematics Transceiver) Click here