REAR DOOR SPEAKER INSPECTION


  1. INSPECT REAR SPEAKER ASSEMBLY


    1. w/o Mark Levinson Speaker System:


      1. A01FDJZJ01
        Text in Illustration
        *a

        Component without harness connected

        (Rear Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 4 Ω

        If the result is not as specified, replace the rear speaker assembly.

    2. w/ Mark Levinson Speaker System:


      1. A01FDJZJ01
        Text in Illustration
        *a

        Component without harness connected

        (Rear Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 4.6 Ω

        If the result is not as specified, replace the rear speaker assembly.

  2. INSPECT REAR NO. 2 SPEAKER ASSEMBLY


    1. When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

      OK
      Malfunction disappears.

      Tech Tips


      • Connect the connectors to the rear No. 2 speakers.

      • When there is a possibility that either the right or left front No. 2 speaker is defective, inspect by interchanging the right one with the left one.

      • Perform the inspection above on both the LH and RH sides.