RADIO RECEIVER INSTALLATION


  1. INSTALL NO. 1 RADIO BRACKET


    1. A01FDDUE01

      Install the No. 1 radio bracket with the 3 screws.

    2. Install the ion generator bracket with the screw labeled A.

  2. INSTALL NO. 2 RADIO BRACKET


    1. A01FHBTE02

      Install the No. 2 radio bracket with the 3 screws.

    2. Install the ion generator bracket with the screw labeled A.

  3. INSTALL NO. 1 ION GENERATOR SUB-ASSEMBLY


    1. Attach the 2 claws to install the rear air duct sub-assembly.

    2. Install the No. 1 ion generator sub-assembly with the 2 screws.

    3. Attach the clamp.

  4. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A01FG23

      Insert the multi-media module receiver assembly with bracket.

      Note

      When inserting the multi-media module receiver, do not press the knobs on it.

    3. Attach the 2 claws and 2 clips.

    4. Install the multi-media module receiver assembly with bracket with the 2 screws.

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL


    1. Connect the connector.

    2. Attach the 9 clips and guide to install the center instrument cluster finish panel.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. REGISTRATION TELEMATICS TRANSCEIVER


    1. When replacing the multi-media module receiver assembly or telematics transceiver, perform the vehicle contract setting Click here.