AUDIO AND VISUAL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING WITH ACCESSORY METER ASSEMBLY (for 12.3 Inch) or MULTI-DISPLAY (for 8 Inch)


    1. Turn the engine switch on (IG).

    2. Using the accessory meter assembly*1 or multi-display*2, select "Setup", "General", and then "Feedback Force" and change the customize setting.


      • *1: for 12.3 Inch

      • *2: for 8 Inch

      Display Default Content Setting Relevant ECU
      Feedback Force 0 (middle bar) Feedback force setting of the remote touch* -2, -1, 0, +1 or +2 Multi-media module receiver assembly
      NO FEEDBACK FORCE/ LEVEL1/LEVEL2/ LEVEL3/LEVEL4

      Tech Tips

      *: The higher the set value, the stronger the remote touch feedback force becomes.