TILT AND TELESCOPIC MANUAL SWITCH INSTALLATION


  1. INSTALL TILT AND TELESCOPIC SWITCH


    1. Attach the claw to install the tilt and telescopic switch.

    2. Connect the connector.

  2. INSTALL STEERING COLUMN COVER


    1. Attach the 2 claws to install the steering column lower cover.

      Note

      Do not damage the tilt and telescopic switch.

    2. Install the 3 screws.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note


    • Reset the auto tilt away function setting to the previous condition by changing the customize parameter Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.