TILT AND TELESCOPIC MANUAL SWITCH INSPECTION


  1. INSPECT TILT AND TELESCOPIC SWITCH


    1. A01FEV4E02

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 3 Telescopic contract 750.5 to 829.5 Ω
      Telescopic extend 152 to 168 Ω
      Tilt up 342 to 378 Ω
      Tilt down 1890.5 to 2089.5 Ω
      Text in Illustration
      *a

      Component without harness connected

      (Tilt and Telescopic Switch)

      If the result is not as specified, replace the tilt and telescopic switch.