BRAKE MASTER CYLINDER DISASSEMBLY

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. Mount the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. A01FJ1X

      Using a pin punch and hammer, remove the pin from the brake master cylinder reservoir.

    3. Remove the brake master cylinder reservoir from the brake master cylinder sub-assembly.

  2. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. A01FIOW

      Remove the 2 master cylinder reservoir grommets from the brake master cylinder sub-assembly.

  3. REMOVE BRAKE FLUID INFORMATION LABEL

  4. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY


    1. Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.

  5. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER


    1. Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.