BRAKE PEDAL ON-VEHICLE INSPECTION


  1. INSPECT BRAKE PEDAL LOAD SENSING SWITCH

    Tech Tips


    • Do not remove the brake pedal load sensing switch from the brake pedal lever sub-assembly.

    • When there is a malfunction in the brake pedal load sensing switch, replace the brake pedal lever sub-assembly.


    1. Disconnect the brake pedal load sensing switch connector.

      A01FHJ4E01
      Text in Illustration
      *1 Brake Pedal Load Sensing Switch - -
      *a Brake pedal released (ON) *b Brake pedal depressed (OFF)

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (FSW+) - 1 (FSW-) Brake pedal depressed 950 to 1050 Ω
      Brake pedal released 203 to 223 Ω