REAR SUNSHADE SWITCH (for Rear Side) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL REAR CONTROL SWITCH


    1. Attach the 4 claws to install the rear control switch.

      Note

      Do not damage the rear seat center armrest panel sub-assembly.

    2. Connect the rear console box wire connector.

      Note

      Do not damage the rear seat center armrest panel sub-assembly.

  2. INSTALL REAR SEAT CENTER ARMREST PANEL SUB-ASSEMBLY


    1. Partially install the rear seat center armrest panel sub-assembly.

      Note

      Do not damage the rear seat center armrest panel sub-assembly.


      1. A01FEKH

        Lift up the center of the rear seat center armrest panel sub-assembly to detach the 3 guides and partially attach the rear seat center armrest panel sub-assembly.

        Note

        Do not damage the rear seat center armrest panel sub-assembly.

      2. Attach the 6 claws.

      3. Install the the screw.

  3. INSPECT REAR SEAT HEATER SYSTEM (w/ Rear Seat Heater System)

    Click here

  4. INSPECT REAR SUNSHADE SYSTEM

    Click here