REAR SUNSHADE SYSTEM Key-off Operation Function Operates even if Operating Conditions are not Satisfied

DESCRIPTION


INSPECTION PROCEDURE

Note

If the main body ECU (multiplex network body ECU) is replaced, refer to the Service Bulletin.

PROCEDURE


  1. CHECK REAR SUNSHADE OPERATION FUNCTION AFTER ENGINE SWITCH TURNED OFF


    1. Check the rear sunshade operation function after the engine switch is turned off Click here.

      OK
      Key-off operation function is normally

    NG
    OK
  2. CHECK NO. 2 INTEGRATION RELAY


    1. Temporarily replace the No. 2 integration relay with a new or normally functioning one Click here.

    2. Check the rear sunshade operation function after the engine switch is turned off Click here.

      OK
      Key-off operation function is normally

    NG
    OK