AIR CONDITIONING PRESSURE SENSOR INSTALLATION


  1. INSTALL AIR CONDITIONER PRESSURE SENSOR


    1. Remove the attached vinyl tape from the air conditioning pressure sensor.

    2. A01FHOK

      Sufficiently apply compressor oil to a new O-ring and the fitting surface of the air conditioning pressure sensor.

      Note

      Keep the O-ring and O-ring fitting surface free from dirt and foreign objects.

      Compressor oil
      ND-OIL 8 or equivalent

    3. Using a 27 mm deep socket wrench, install the air conditioning pressure sensor.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    4. Connect the connector.

  2. INSTALL LOW PITCHED HORN ASSEMBLY


    1. Install the low pitched horn assembly with the bolt.

      Torque:
      19 N*m  { 195 kgf*cm, 14 ft.*lbf }

    2. Connect the connector.

  3. CHARGE REFRIGERANT

    Click here

  4. WARM UP ENGINE

    Click here

  5. CHECK FOR REFRIGERANT GAS LEAK

    Click here

  6. INSTALL FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here