AIR CONDITIONING PRESSURE SENSOR INSTALLATION


  1. INSTALL AIR CONDITIONER PRESSURE SENSOR


    1. Remove the attached vinyl tape from the air conditioning pressure sensor.

    2. A01FHOK

      Sufficiently apply compressor oil to a new O-ring and the fitting surface of the air conditioning pressure sensor.

      Note

      Keep the O-ring and O-ring fitting surface free from dirt and foreign objects.

      Compressor oil
      for HFC-134a (R134a)
      ND-OIL 8 or equivalent
      for HFO-1234yf (R1234yf)
      ND-OIL 12 or equivalent

    3. Using a 27 mm deep socket wrench, install the air conditioning pressure sensor.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    4. Connect the connector.

  2. INSTALL LOW PITCHED HORN ASSEMBLY


    1. Install the low pitched horn assembly with the bolt.

      Torque:
      19 N*m  { 195 kgf*cm, 14 ft.*lbf }

    2. Connect the connector.

  3. CHARGE REFRIGERANT


    1. HFC-134a (R134a):

      Click here

    2. HFO-1234yf (R1234yf):

      Click here

  4. WARM UP ENGINE


    1. HFC-134a (R134a):

      Click here

    2. HFO-1234yf (R1234yf):

      Click here

  5. CHECK FOR REFRIGERANT GAS LEAK


    1. HFC-134a (R134a):

      Click here

    2. HFO-1234yf (R1234yf):

      Click here

  6. INSTALL FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here