ROOM TEMPERATURE SENSOR REMOVAL


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    A01FD7VE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the center instrument cluster finish panel.

    2. Detach the 9 clips and guide.

    3. Disconnect the connector and remove the center instrument cluster finish panel.

  2. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. A01FG68

      Remove the 2 bolts.

    2. A01FHN5

      Detach the 2 claws and 2 clips.

    3. Pull out the multi-media module receiver assembly.

    4. Disconnect the connectors and remove the multi-media module receiver assembly.

  3. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (w/ Ion Generator)

    A01FHIHE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 2 instrument panel register assembly.

    2. Using a moulding remover, detach the 7 clips.

    3. Disconnect the connectors and remove the No. 2 instrument panel register assembly.

  4. REMOVE AIR DUCT SUB-ASSEMBLY (w/ Ion Generator)

    A01FFHJ

    1. Detach the 2 claws.

    2. Remove the clip and air duct sub-assembly.

  5. REMOVE COOLER THERMISTOR

    A01FE77

    1. Disconnect the connector and hose.

    2. Detach the 2 claws and remove the cooler thermistor (room temperature sensor).