REAR SEAT OUTER BELT ASSEMBLY ON-VEHICLE INSPECTION

CAUTION:

Be sure to follow the correct removal and installation procedures of the rear seat outer belt assembly.


  1. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)


    1. Perform a diagnostic system check Click here.

    2. Visually check for defects with the rear seat outer belt assembly installed on the vehicle.


      1. The defects are as follows:


        • Cuts on the rear seat outer belt assembly

        • Small cracks on the rear seat outer belt assembly

        • Significant discoloration on the rear seat outer belt assembly

        OK
        No defects are found.

        Tech Tips

        If any of the defects is found, replace the rear seat outer belt assembly with a new one.

  2. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)


    1. Perform a diagnostic system check Click here.

    2. Visually check for defects with the rear seat outer belt assembly removed from the vehicle.


      1. The defects are as follows:


        • Cuts on the rear seat outer belt assembly

        • Small cracks on the rear seat outer belt assembly

        • Significant discoloration on the rear seat outer belt assembly

        • Cracks or other damage to the connector

        OK
        No defects are found.

        Tech Tips

        If any of the defects is found, replace the rear seat outer belt assembly with a new one.