REAR SEATBACK HEATER REMOVAL

Tech Tips

The rear seatback heater cannot be removed as it is connected to the bench type rear seatback cover as a unit.


  1. REMOVE REAR SEAT ASSEMBLY

    Click here

  2. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. for Luxury Seat Type:


      1. A01FHU7

        w/o Seat Heater System:

        Disconnect the connector and detach the clamp of the rear console box wire.

      2. A01FIEV

        w/ Seat Heater System:

        Disconnect the connector, detach the clamp of the rear console box wire and detach the 3 clamps of the rear seat wire RH.

      3. A01FE0O

        Position the rear console box wire as shown in the illustration.

    2. A01FF5W

      Remove the hog rings.

    3. A01FIS5

      Remove the 2 nuts.

    4. Move the rear seat center armrest assembly in the direction of the arrow to detach the 2 hooks and remove the rear seat center armrest assembly.

  3. REMOVE REAR SEAT SHOULDER BELT GUIDE RH


    1. A01FEW5

      Remove the 3 screws and rear seat shoulder belt guide RH.

  4. REMOVE REAR SEAT SHOULDER BELT GUIDE LH

    Tech Tips

    Use the same procedure described for the RH side.

  5. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE


    1. A01FFQB

      Remove the 2 screws and rear seat center shoulder belt guide.

  6. REMOVE REAR SEAT HEADREST SUPPORT


    1. A01FI5E

      Remove the hog rings.

    2. A01FGMC

      Detach the 12 claws and remove the 6 rear seat headrest supports.

  7. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY

    Tech Tips

    Use the same procedure for the other seat heater control sub-assembly.


    1. A01FFCU

      Using a screwdriver, detach the claw and remove the seat heater control sub-assembly.

    2. A01FIK3

      Using a screwdriver, detach the claw and disconnect the rear seatback heater connector.

  8. REMOVE BENCH TYPE REAR SEATBACK COVER


    1. A01FHDS

      Disconnect the 2 rear seatback heater connectors.

    2. Pass the rear seat wire RH under the rubber bands of the bench type rear seatback cover.

    3. Detach the clamp of the rear seat wire RH.

    4. Remove the hog rings.

    5. Pass the bench type rear seatback cover through the holes in the bench type rear seatback pad.

    6. Pass the bench type rear seatback pad through the holes in the bench type rear seatback cover and remove the bench type rear seatback cover.

      A01FI9I
    7. A01FHWI

      Pass the rear seatback heater wire harnesses through the holes in the bench type rear seatback cover.

    8. Remove the rear seat airbag assembly LH Click here.

    9. Remove the rear seat airbag assembly RH.

      Tech Tips

      Use the same procedure described for the LH side.

    10. A01FETM

      Pass the brackets of the bench type rear seatback cover through the holes in the bench type rear seatback pad.

    11. Remove the hog rings and bench type rear seatback cover from the bench type rear seatback pad.

      A01FIAU