FRONT SEATBACK HEATER (for Standard Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    A01FGBV

    1. Using a clip remover, remove the clip and disconnect the rubber band.

    2. Detach the hook and disconnect the rubber band.

    3. Using a clip remover, remove the clip.

    4. A01FH5P

      Open the lower part of the front seatback board sub-assembly LH and remove the 2 screws.

    5. Push and slide the front seatback board subassembly LH to detach the claw.

      Tech Tips

      Use the same procedure to detach the claw on the other side.

    6. Slide the front seatback board sub-assembly LH downward to detach the 2 hooks and remove it.

  3. REMOVE SEATBACK COVER WITH PAD


    1. A01FHTB

      w/ Seat Heater System:

      Disconnect the connector.

    2. A01FDR9

      Detach the hooks.

    3. A01FIPY

      Detach the 4 claws and remove the 2 front seat headrest supports.

    4. A01FHN4E01
      Text in Illustration
      *1 Seatback Cover Bracket

      Detach the wire harness clamp.

    5. Remove the 2 nuts and detach the seatback cover bracket.

    6. Remove the seatback cover with pad.

  4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01FG8P

      Pass the 2 seatback cover brackets through the 2 holes of the separate type front seatback pad.

    2. A01FILX

      Remove the hog rings and separate type front seatback cover from the separate type front seatback pad.