LUMBAR SWITCH (for Sports Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE FRONT SEAT ASSEMBLY RH


    1. Use the same procedure described for the LH side Click here.

  2. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD RH

    A01FI0C

    1. Remove the screw.

    2. Detach the 2 claws and 2 clips and remove the front seat inner No. 1 cushion shield RH.

  3. REMOVE FRONT SEAT CUSHION SHIELD RH

    A01FI8AE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the 2 screws.

    2. Detach the 3 claws and 2 guides.

    3. Detach the hook and remove the front seat cushion shield RH.

  4. REMOVE POWER SEAT SWITCH KNOB RH (for Slide)

    A01FDN8E01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using moulding remover A, detach the 4 claws and remove the power seat switch knob RH.

  5. REMOVE POWER SEAT SWITCH KNOB RH (for Reclining)

    A01FHGYE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using moulding remover A, detach the 3 claws and remove the power seat switch knob RH.

  6. REMOVE FRONT POWER ADJUSTER SHIELD RH

    A01FDFN

    1. Remove the 2 screws.

    2. Detach the 2 clips and remove the front power adjuster shield RH.

    3. A01FHW5

      Disconnect the 2 connectors.

    4. A01FGVP

      Remove the 4 screws and switch bezel from the front power adjuster shield RH.

    5. A01FIMJ

      Remove the 2 clips from the front power adjuster shield RH.

  7. REMOVE POWER SEAT SWITCH ASSEMBLY

    A01FDMI

    1. Remove the 3 screws and 3 nuts.

    2. Detach the 2 claws and remove the power seat switch assembly from the switch bezel.

  8. REMOVE FRONT LUMBAR POWER SEAT SWITCH

    A01FFRZE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 4 claws and remove the front lumbar power seat switch.

      Tech Tips

      Tape the screwdriver tip before use.