PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01FIYIE07
      Text in Illustration
      *a

      Component without harness connected

      (Park/Neutral Position Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 6 and 4 - 5 P Below 1 Ω
      ↑ Except P 10 kΩ or higher
      1 - 2 R Below 1 Ω
      ↑ Except R 10 kΩ or higher
      2 - 9 and 4 - 5 N Below 1 Ω
      ↑ Except N 10 kΩ or higher
      2 - 7 D, M, "+" and "-" Below 1 Ω
      ↑ Except D, M, "+" and "- " 10 kΩ or higher

      If the resistance value is not as specified, replace the park/neutral position switch assembly.