TRANSMISSION WIRE REMOVAL


  1. DRAIN AUTOMATIC TRANSMISSION FLUID


    1. Remove the drain plug and gasket, and drain the ATF.

    2. Install a new gasket and the drain plug.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  2. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY


    1. A01FJ1M

      Remove the 2 nuts, 4 bolts and No. 1 exhaust pipe support bracket sub-assembly.

      Tech Tips

      Turn the nut while holding the bolt.

  3. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

    Note

    Some fluid will remain in the oil pan.


    1. A01FG5K

      Remove the 20 bolts, automatic transmission oil pan sub-assembly and transmission oil pan gasket.

    2. Remove the 3 magnets from the oil pan.

    3. Examine particles in the transmission oil pan sub-assembly.


      1. Collect any steel chips with the removed magnets.

        Carefully look for the foreign objects and particles in the transmission oil pan sub-assembly and on the magnets to guess the type of wear which might be found in the automatic transmission with transfer assembly.

        Result
        Steel (magnetic)
        Bearing, gear and plate wear
        Brass (non-magnetic)
        Bushing wear

  4. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


    1. A01FDJO

      Remove the 4 bolts and valve body oil strainer assembly.

      Note

      Be careful as some fluid will come out of the valve body oil strainer assembly.

    2. A01FEB5E03
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the valve body oil strainer assembly.

  5. DISCONNECT TRANSMISSION WIRE


    1. A01FG08

      Remove the bolt and the temperature sensor clamp.

    2. Disconnect the ATF temperature sensor.

    3. A01FJ42E02

      Remove the 2 bolts and the 2 valve body wire harness clamps.

    4. A01FHLD

      Disconnect the 9 connectors from the shift solenoid valves.

  6. REMOVE TRANSMISSION WIRE


    1. A01FDCVE02

      Disconnect the transmission wire connector.

      Tech Tips

      Detach the claw, press down the lever, and disconnect the transmission wire connector.

    2. A01FHST

      Remove the bolt and pull out the transmission wire.

    3. A01FGH6E05
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the transmission wire.