PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY


    1. A01FGCF

      Remove the clip and pin, and disconnect the floor shift gear shifting rod sub-assembly from the transmission control shaft lever LH.

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01FIWKE01
      Text in Illustration
      *a Front

      Disconnect the park/neutral position switch connector.

    2. A01FFZME06
      Text in Illustration
      *1 Lock Washer
      *2 Lock Nut

      Using a screwdriver, pry out the lock washer.

    3. A01FH2X

      Remove the lock nut and lock washer.

    4. A01FFKB

      Remove the bolt and park/neutral position switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.