TRANSMISSION WIRE INSPECTION


  1. INSPECT TRANSMISSION WIRE


    1. A01FI6GE05
      Text in Illustration
      *a

      Component without harness connected

      (Transmission Wire)

      Using an ohmmeter, measure the resistance between the terminals.

      Standard Resistance
      Tester Connection Specified Condition
      9 (OIL) - 1 (E2) 79 Ω to 156 kΩ
      9 (OIL) - Body ground 10 kΩ or higher
      1 (E2) - Body ground 10 kΩ or higher

      Tech Tips

      If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

      Standard Resistance
      ATF Temperature Specified Condition
      10°C (50°F) 5 to 8 kΩ
      25°C (77°F) 2.5 to 4.5 kΩ
      110°C (230°F) 0.22 to 0.28 kΩ

      If the result is not as specified, replace the ATF temperature sensor (transmission wire).