AUTOMATIC TRANSMISSION SYSTEM INITIALIZATION


  1. RESET MEMORY

    Note


    • Perform the RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM.

    • The RESET MEMORY can be performed only with the GTS.

    Tech Tips

    The ECM memorizes the condition that the ECT controls the automatic transmission assembly and engine assembly according to those characteristics. Therefore, when the automatic transmission assembly, engine assembly, or ECM has been replaced, it is necessary to reset the memory so that the ECM can memorize the new information.

    Reset procedure is as follows.


    1. Turn the engine switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the engine switch on (IG) position.

    4. Turn the GTS main switch on.

    5. Enter the following menu: Powertrain / Engine and ECT / Utility / Reset Memory. Then, press "Next".

    6. Perform the reset memory procedure from the main menu.