STARTER INSTALLATION


  1. INSTALL STARTER ASSEMBLY


    1. Install the starter with the 2 bolts.

      Torque:
      58 N*m  { 591 kgf*cm, 43 ft.*lbf }

    2. Connect the starter cable with the nut, and then attach the terminal cap.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Connect the starter connector.

  2. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.