EXHAUST PIPE REMOVAL


  1. REMOVE NO. 1 REAR FLOOR BOARD SUB-ASSEMBLY


    1. A01FIXV

      Remove the 4 grommets, 7 clips and No. 1 rear floor board sub-assembly.

  2. REMOVE NO. 2 REAR FLOOR BOARD SUB-ASSEMBLY


    1. A01FG9R

      Remove the 4 grommets, 7 clips and No. 2 rear floor board sub-assembly.

  3. REMOVE FRONT CENTER FLOOR BRACE


    1. A01FE0M

      Remove the 6 bolts, 2 nuts, 2 clips and front center floor brace.

  4. DISCONNECT HEATED OXYGEN SENSOR


    1. for Bank 1 Sensor 2:


      1. A01FECSE01
        Text in Illustration
        *1 Grommet

        Disconnect the grommet of the heated oxygen sensor.

      2. A01FENTE01

        Using SST, disconnect the heated oxygen sensor.

        SST
        09224-00010

    2. for Bank 2 Sensor 2:


      1. A01FD99E01
        Text in Illustration
        *1 Grommet

        Disconnect the grommet of the heated oxygen sensor.

      2. A01FGR0E01

        Using SST, disconnect the heated oxygen sensor.

        SST
        09224-00010

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01FDFD

      Remove the 4 nuts, 8 bolts, 4 compression springs and front exhaust pipe assembly.

    2. Remove the 4 gaskets.

    3. w/ Protector:

      Tech Tips

      Only perform this procedure when replacement of the front No. 1 exhaust pipe protector is necessary.

      A01FE6G

      1. Remove the bolt and clamp.

      2. Remove the 2 bolts, 2 nuts, exhaust pipe protector stay and front No. 1 exhaust pipe protector.

  6. REMOVE TAILPIPE RH


    1. A01FGDA

      Remove the tailpipe RH from the 3 exhaust pipe supports.

  7. REMOVE TAILPIPE LH


    1. A01FDML

      Remove the tailpipe LH from the 3 exhaust pipe supports.