CANISTER (w/o Canister Pump Module) REMOVAL


  1. REMOVE FUEL TANK VENT TUBE ASSEMBLY

    Click here

  2. REMOVE CHARCOAL CANISTER ASSEMBLY


    1. A01FEM4E01

      Disconnect the fuel sender gauge connector.

    2. Push the claw labeled A of the No. 2 fuel sender gauge assembly, and then pull up the No. 2 fuel sender gauge assembly to remove it.

      Note


      • Do not touch the resistance plate or contacts of the No. 2 fuel sender gauge assembly.

      • Do not bend the arm of the No. 2 fuel sender gauge assembly.