FUEL TANK (w/ Canister Pump Module) REMOVAL


  1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE

    Click here.

  2. REMOVE FUEL TANK VENT TUBE ASSEMBLY

    Click here

  3. DRAIN FUEL

  4. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here

  5. DISCONNECT FUEL TUBE


    1. A01FE3YE02
      Text in Illustration
      *1 Retainer
      *2 Fuel Tube Connector
      *3 Nylon Tube
      *4 O-Ring
      *5 Pipe

      Detach the 2 claws of the fuel tube connector retainer, push down the retainer and disconnect the fuel tank main tube sub-assembly for the RH side and fuel tank return tube as shown in the illustration.

      Note


      • Remove any dirt and foreign objects on the fuel tube connector before performing this work.

      • Do not allow any scratches or foreign objects on the parts when disconnecting, as the fuel tube connector has O-rings that seal the pipe.

      • Perform this work by hand. Do not use any tools.

      • Do not forcibly bend, twist or turn the nylon tube.

      • Protect the disconnected part by covering it with a plastic bag after disconnecting the fuel pump tube.

      • If the fuel tube connector and pipe are stuck, push and pull on them to release them.

  6. DISCONNECT FUEL TANK TO FILLER PIPE HOSE


    1. A01FHEX

      Loosen the hose clamp bolt and disconnect the fuel tank to filler pipe hose.

  7. DISCONNECT FUEL CUT OFF VALVE TUBE


    1. A01FFLI

      Disconnect the quick connector and clamp Click here.

  8. DISCONNECT FUEL TANK BREATHER TUBE


    1. A01FGPJ

      Disconnect the quick connector and clamp Click here.

  9. REMOVE REAR SUSPENSION MEMBER BRACE

    Click here

  10. REMOVE FUEL TANK ASSEMBLY


    1. A01FFUSE01

      Using an engine lifter and attachments, support the fuel tank assembly.

      Text in Illustration
      A01FGIV Bolt
      A01FJ4N Nut

    2. Remove the 2 nuts, 4 bolts and 2 No. 1 fuel tank band sub-assemblies.

    3. Using an engine lifter, lower the fuel tank assembly and remove it.

  11. REMOVE FUEL TUBE


    1. A01FHMSE01
      Text in Illustration
      *1 Fuel Tank Return Tube
      *2 Fuel Tank Main Tube Sub-assembly

      Detach the clamp and remove the fuel tank return tube and fuel tank main tube sub-assembly from the fuel tank assembly.

    2. Remove the No. 5 fuel tube clamp from the fuel tank assembly.

  12. REMOVE FUEL TANK CUSHION


    1. A01FIY3

      Remove the 5 No. 6 fuel tank cushions from the fuel tank assembly.

    2. A01FJ2WE01
      Text in Illustration
      *1 Fuel Tank Bracket
      *2 Fuel Tank Cushion
      *3 Fuel Tank Cushion Set
      *a RH side
      *b LH side

      Remove the fuel tank bracket, 2 fuel tank cushions and fuel tank cushion set from the fuel tank assembly.

  13. REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY


    1. A01FIN3E01
      Text in Illustration
      *1 No. 1 Fuel Tank Protector Sub-assembly
      *2 No. 2 Fuel Tank Protector
      *3 No. 3 Fuel Tank Protector

      Remove the No. 1 fuel tank protector sub-assembly from the fuel tank assembly.

    2. Remove the No. 2 fuel tank protector and No. 3 fuel tank protector from the fuel tank assembly.