FUEL PRESSURE SENSOR INSPECTION


  1. INSPECT FUEL PRESSURE SENSOR


    1. A01FF8DE01
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Pressure Sensor)
      *b Voltage applied bet ween terminals

      Check the fuel pressure sensor output voltage.


      1. Apply 5 V between terminals 3 (VC) and 1 (E2).

        Note


        • Be careful when connecting the leads, as the fuel pressure sensor may be damaged if the leads are connected to the wrong terminals.

        • Do not apply 6 V or more of voltage to terminals 3 (VC) and 1 (E2).

        Tech Tips

        If a stable power supply is not available, use 4 1.2 V nickel-metal hydride batteries, etc.

      2. A01FF90E07
        Text in Illustration
        *a

        Component without harness connected

        (Fuel Pressure Sensor)

        Measure the voltage between terminals .

        Standard Voltage
        Tester Connection Condition Specified Condition
        2 (PR) - 1 (E2) Pressure not applied to fuel pressure sensor Approximately 0.5 V*

        *: The output voltage changes depending on the voltage applied to the terminals.

        Output voltage = (0.1 x Voltage applied to terminals)

        If the result is not as specified, replace the fuel pressure sensor.