FUEL PRESSURE SENSOR REMOVAL


  1. REMOVE FUEL RELIEF VALVE ASSEMBLY

    Click here

  2. REMOVE NO. 3 WATER BY-PASS PIPE


    1. A01FEGK

      Disconnect the 2 heater water hoses.

    2. Detach the wire harness clamp from the No. 3 water by-pass pipe.

    3. Remove the bolt.

    4. Disconnect the 2 water by-pass hoses and remove the No. 3 water by-pass pipe.

  3. REMOVE FUEL PRESSURE SENSOR

    A01FJ06

    1. Disconnect the connector and clamp.

    2. Remove the fuel pressure sensor and gasket.