FUEL PRESSURE PULSATION DAMPER REMOVAL


  1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY

    Click here

  2. REMOVE NO. 3 WATER BY-PASS PIPE


    1. A01FEGK

      Disconnect the 2 heater water hoses.

    2. Detach the wire harness clamp from the No. 3 water by-pass pipe.

    3. Remove the bolt.

    4. Disconnect the 2 water by-pass hoses and remove the No. 3 water by-pass pipe.

  3. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    1. A01FGUEE01
      Text in Illustration
      *1 Fuel Tube Sub-assembly

      Remove the fuel pressure pulsation damper and 2 gaskets, and disconnect the fuel tube from the fuel pump.