FUEL INJECTOR (for Direct Injection) INSPECTION


  1. INSPECT FUEL INJECTOR ASSEMBLY

    Note

    This inspection aims at inspecting the fuel injectors for opens or shorts, because the fuel injectors of this vehicle are a high-pressure type and cannot be inspected for fuel injection volume.


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 2.01 to 2.31 Ω

      If the result is not as specified, replace the fuel injector assembly.