REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for 2WD)

    Click here

  2. REMOVE AUTOMATIC WITH TRANSFER TRANSMISSION ASSEMBLY (for AWD)

    Click here

  3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A01FJ22E03

      Using SST, hold the crankshaft pulley.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01FHAX

      Remove the 8 bolts, front drive plate spacer, drive plate and rear drive plate spacer.

  4. REMOVE REAR ENGINE OIL SEAL


    1. A01FENYE13
      Text in Illustration
      *1 Cut Position
      *2 Protective Tape

      Using a knife, cut through the oil seal lip.

    2. Using a screwdriver with its tip taped, pry out the oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.